Lidar

This laser module integrates a 3k narrow linewidth laser with an SOA, delivering 200mW of optical power output. It is suitable for use in distributed fiber optic sensing (DAS) applications.

Narrow linewidth At 10-20kHz sweep rates, high-speed operation can reach 300kHz (triangular wave), with a sweep range below 10GHz. Typically used for precision ranging and FMCW LiDAR, it achieves micrometer-level resolution.

1064nm narrow linewidth single-frequency laser module with a linewidth less than 20kHz and an output power of 20mW. Suitable for applications in lidar, fiber sensing, precision instruments, and coherent detection.

This 1310nm narrow-linewidth laser module can be used in lidar, coherent detection, fiber optic sensing, medical photonics, scientific research equipment, 3D mapping, and other fields.

The laser's Wavelength Tuning Range extends up to 100 GHz with a linewidth of 100–200 kHz. This instrument is suitable for close-range high-precision measurements and ultra-precise analytical equipment.

Wide-range 600GHz/200Hz for applications including OFDR optical link detection, micro-stress strain measurement, and temperature strain detection.

The 1064nm APD photodetector is specially designed for meteorological Lidar | Aerosol Radar applications, the detector chip is made of Si material at 1064nm response enhancement (0.36A/W), with a 0.8mm photosensitive diameter to facilitate the Lidar return alignment and coupling, the product is mature and stable for the batch supply products.

Wind radar, BPD balanced photodetector for FMCW radar with 300M bandwidth, 18k gain

Narrow-linewidth laser modules with customizable wavelengths ranging from 1511 to 1590 nm and output powers of 10 to 20 mW are suitable for fiber optic sensing and lidar applications.

1kHz Narrow Linewidth Laser Module Output Power: 10mW Suitable for high-precision instruments

We support customization of 3kHz narrow linewidth butterfly lasers with wavelengths ranging from 1511 to 1590 nm and an output power of 20 mW.

This is a semiconductor laser with a linewidth less than 3k and an output optical power of 20mW. Equipped with a stable laser driver circuit, the laser module enables stable output of 1550nm laser light, making it highly suitable for use in distributed fiber optic acoustic sensing (DAS) or DVS systems.

This laser delivers 100mW of power output with a linewidth of 3k, supporting both continuous and pulsed light output. It is ideally suited for use in distributed fiber optic vibration monitoring systems as a replacement for an AOM.

This device features dual-output design for pulse signal light and intrinsic reference light, offering ultra-narrow linewidth, high pulse peak power, high switching extinction ratio, wavelength stability, low noise, low power consumption, and high reliability, making it a superior semiconductor laser product.